{"id":1981,"date":"2021-05-11T14:49:44","date_gmt":"2021-05-11T12:49:44","guid":{"rendered":"https:\/\/www.fuhr-wire.com\/?page_id=1981"},"modified":"2021-07-28T12:18:51","modified_gmt":"2021-07-28T10:18:51","slug":"smh-flying-spooler","status":"publish","type":"page","link":"https:\/\/www.fuhr-wire.com\/en\/products\/components\/coilers\/smh-flying-spooler\/","title":{"rendered":"SMH | Flying spooler"},"content":{"rendered":"

[vc_row bg_element=”bg_wave_light” full_width=”stretch_row”][vc_column]

\n\t\t\t

SMH | Flying spooler<\/p>\n\t\t\t

<\/p>\n\t\t<\/div>[vc_row_inner][vc_column_inner width=”1\/2″][vc_single_image image=”2229″ img_size=”full” onclick=”link_image”][vc_column_text]\n\tSMH | Flying Spooler\t

Cantilever spool mounting<\/p>\n<\/a>[\/vc_column_text][\/vc_column_inner][vc_column_inner width=”1\/2″][vc_column_text]<\/p>\n

SMH | Cantilever spool mounting<\/h2>\n

The machines of SMH type are characterized by the one-sided take-up of the material to be wound. This is referred to as a so-called cantilever spooler. It makes these machines less expensive than comparable designs with two sleeves (type SMH-Pi).<\/p>\n

A cantilever spooler is only possible when the bore of the reels is big enough for them to be mounted on a stable spindle. This means that coil bore and weight must be in an appropriate relation.<\/p>\n

All models are available with and without oscillation.<\/p>\n

The machines of SMH type feature modular design and can therefore be supplied in many variations. They are used with reels made of steel, plastic or wood, but can also be equipped with expanding mandrels for the production of coreless coils.[\/vc_column_text][\/vc_column_inner][\/vc_row_inner][\/vc_column][\/vc_row][vc_row full_width=”stretch_row”][vc_column][vc_column_text]<\/p>\n

Application examples<\/h3>\n

[\/vc_column_text][vc_row_inner][vc_column_inner width=”1\/2″][vc_column_text]<\/p>\n

Basic model<\/h4>\n